unisonic technologies co., ltd dtc115e npn silicon transistor www.unisonic.com.tw 1 of 2 copyright ? 2011 unisonic technologies co., ltd qw-r206-055,ca npn digital transistor (built- in bias resistors) ? features * built-in bias resistors that im plies easy on/off applications. * the bias resistors are thin-film resistors with complete isolation to allow negative input. ? equivalent circuit ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 dtc115el-ae3-r DTC115EG-AE3-R sot-23 g i o tape reel dtc115el-al3-r dtc115eg-al3-r sot-323 g i o tape reel dtc115el-an3-r dtc115eg-an3-r sot-523 g i o tape reel ? marking information
dtc115e npn silicon transistor unisonic technologies co., ltd 2 of 2 www.unisonic.com.tw qw-r206-055,ca ? absolute maximum rating ( t a =25 ) parameter symbol ratings unit supply voltage v cc 50 v input voltage v in -10 ~ +40 v output current i out 20 ma i c ( ma x ) 100 power dissipation sot-23/sot-323 p c 200 mw sot-523 150 mw junction temperature t j +150 storage temperature t stg -55 ~ +150 note: absolute maximum ratings are those values beyo nd which the device could be permanently damaged. absolute maximum ratings are st ress ratings only and functional device operation is not implied. ? electrical characteristics (t a =25 , unless otherwise specified) parameter symbol test conditions min typ max unit input voltage v i ( off ) v cc =5v, i out =100 a 0.5 v v i ( on ) v out =0.3v, i out =1ma 3 output voltage v out ( on ) i out =5ma, i in =0.25ma 0.1 0.3 v input current i in v in = 5v 0.15 ma output current i o ( off ) v cc =50v, v in =0v 0.5 a dc current gain g i v out = 5v, i out = 5ma 82 input resistance r1 70 100 130 k ? resistance ratio r2/r1 0.8 1 1.2 transition frequency f t v ce =10v, i e =-5ma, f=100mhz (note) 250 mhz note: transition frequency of the device utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
